Specialized In Die Casting Service And Parts with Professional Design and Development

102,No.41,Changde Road,Xiaojiejiao,Humen Town,Dongguan,China | +86 769 8151 9985 | sales@hmminghe.com

Why Can Not Use Motors Be Used In Plateau Areas

Publish Time: Author: Site Editor Visit: 14283

Why Can't Use Motors Be Used In Plateau Areas?

The main characteristics of the plateau area are:

  1. The air pressure or air density is low.
  2. The air temperature is low, and the temperature changes greatly.
  3. The absolute humidity of the air is small.
  4. High solar radiation illuminance. The oxygen content of the air at 5000m is only 53% of the oxygen content of sea level air. and many more

The altitude has an adverse effect on the temperature rise of the motor, the motor corona (high-voltage motor) and the commutation of the DC motor. The following three aspects should be noted:

  1. At high altitude, the greater the temperature rise of the motor, the smaller the output power. But when the temperature decreases with the increase in altitude enough to compensate for the influence of altitude on temperature rise, the rated output power of the motor can be unchanged;
  2. Anti-corona measures should be taken when high-voltage motors are used on plateaus;
  3. The altitude is unfavorable for the commutation of the DC motor, so pay attention to the selection of carbon brush materials.

Plateau motor refers to the motor whose altitude is higher than 1000 meters. According to the national industry standard: JB/T7573-94 General technical conditions for electrical products under plateau environmental conditions, plateau motors are divided into many levels: they are no more than 2000 meters, 3000 meters, 4000 meters, and 5000 meters.

Plateau motors operate at high altitudes, due to low air pressure, poor heat dissipation conditions, and losses will increase and operating efficiency will decrease. Therefore, the same, the rated electromagnetic load and heat dissipation design of motors running at different altitudes are different. For motors that are not high-altitude specifications, it is best to reduce the load appropriately. Otherwise, the life and performance of the motor will be affected, and even burn out in a short time.

Due to the characteristics of the plateau will bring the following adverse effects on the operation of the motor, corresponding measures should be taken in the design and manufacturing:

  1. Cause the insulation strength to decrease: for every 1000 meters, the insulation strength will decrease by 8-15%.
  2. The breakdown voltage of the electrical gap decreases, so the electrical gap should be increased according to the altitude.
  3. The initial voltage of the corona is reduced, and measures to prevent corona should be strengthened.
  4. The cooling effect of the air medium decreases, the heat dissipation capacity decreases, and the temperature rise increases. For every 1000M increase, the temperature rise will increase by 3-10%, so the temperature rise limit must be revised.

Please keep the source and address of this article for reprinting: Why Can Not Use Motors Be Used In Plateau Areas


Minghe Die Casting Company are dedicated to manufacture and provide quality and high performance Casting Parts(metal die casting parts range mainly include Thin-Wall Die Casting,Hot Chamber Die Casting,Cold Chamber Die Casting),Round Service(Die Casting Service,Cnc Machining,Mold Making,Surface Treatment).Any custom Aluminum die casting, magnesium or Zamak/zinc die casting and other castings requirements are welcome to contact us.

ISO90012015 AND ITAF 16949 CASTING COMPANY SHOP

Under the control of ISO9001 and TS 16949,All processes are carried out through hundreds of advanced die casting machines, 5-axis machines, and other facilities, ranging from blasters to Ultra Sonic washing machines.Minghe not only has advanced equipment but also have professional team of experienced engineers,operators and inspectors to make the customer’s design come true.

POWERFUL ALUMINUM DIE CASTING WITH ISO90012015

Contract manufacturer of die castings. Capabilities include cold chamber aluminum die casting parts from 0.15 lbs. to 6 lbs., quick change set up, and machining. Value-added services include polishing, vibrating, deburring, shot blasting, painting, plating, coating, assembly, and tooling. Materials worked with include alloys such as 360, 380, 383, and 413.

PERFECT ZINC DIE CASTING PARTS IN CHINA

Zinc die casting design assistance/concurrent engineering services. Custom manufacturer of precision zinc die castings. Miniature castings, high pressure die castings, multi-slide mold castings, conventional mold castings, unit die and independent die castings and cavity sealed castings can be manufactured. Castings can be manufactured in lengths and widths up to 24 in. in +/-0.0005 in. tolerance.  

ISO 9001 2015 certified manufacturer of die cast magnesium and mold manufacturing

ISO 9001: 2015 certified manufacturer of die cast magnesium, Capabilities include high-pressure magnesium die casting up to 200 ton hot chamber & 3000 ton cold chamber, tooling design, polishing, molding, machining, powder & liquid painting, full QA with CMM capabilities, assembly, packaging & delivery.

Minghe Casting Additional Casting Service-investment casting etc

ITAF16949 certified. Additional Casting Service Include investment casting,sand casting,Gravity Casting, Lost Foam Casting,Centrifugal Casting,Vacuum Casting,Permanent Mold Casting,.Capabilities include EDI, engineering assistance, solid modeling and secondary processing.

Casting Parts Application Case Studies

Casting Industries Parts Case Studies for: Cars, Bikes, Aircraft, Musical instruments, Watercraft, Optical devices, Sensors, Models, Electronic devices, Enclosures, Clocks, Machinery, Engines, Furniture, Jewelry, Jigs, Telecom, Lighting, Medical devices, Photographic devices, Robots, Sculptures, Sound equipment, Sporting equipment, Tooling, Toys and more. 


What Can we help you do next?

∇ Go To Homepage For Die Casting China

Casting Parts-Find out what we have done.

→Ralated Tips About Die Casting Services


By Minghe Die Casting Manufacturer |Categories: Helpful Articles |Material Tags: , , , , , ,Bronze Casting,Casting Video,Company History,Aluminum Die Casting |Comments Off

MingHe Casting Advantage

  • Comprehensive Casting design software and skilled engineer enables sample to be done within 15-25 days
  • Complete set of inspection equipment & quality control makes excellent Die Casting products
  • A fine shipping process and good supplier guarantee we can always deliver Die Casting goods on time
  • From prototypes to end parts, upload your CAD files, fast and professional quote in 1-24 hours
  • Wide-ranging capabilities for designing prototypes or massive manufacturing end use Die Casting parts
  • Advanced Die Casting techniques (180-3000T Machine,Cnc Machining, CMM) process a variety of metal & plastic materials

HelpFul Articles

Rare earth can effectively improve the toughness of cast steel

As we all know, adding an appropriate amount of rare earth elements to steel materials will have a s

Why Can Not Use Motors Be Used In Plateau Areas

Plateau motors operate at high altitudes, due to low air pressure, poor heat dissipation conditions,

Die casting release agent can improve production efficiency and quality problems

The function of die-casting release agent is to improve the production efficiency of castings and pr